We’re excited to announce a major milestone for the CARBCOMN project: the first block print trial was successfully conducted at Ghent University in May 2025.
In this print trial, we utilized concrete materials developed by UGent and Orbix, consisting entirely of a secondary carbonatable binder and aggregates derived from industrial waste.
The initial geometry and corresponding print path were proposed by In3d, aligned with the project’s design intent to create a compression-dominant structure. The print path code was then further refined in close collaboration between In3D and UGent to ensure compatibility with the 6-axis robotic arm and the setup at UGent.
After intense preparations, two prototype blocks were printed by the UGent team without significant deformation or collapse, each comprising 42 layers with a layer height of 8 mm. Following printing, the blocks were carefully transferred to controlled carbonation chambers for curing, proper strengths were obtained finally, indicating the success of the print trials and a significant step toward sustainable, compression-dominant construction. See the video of the trial printing through the link:https://www.youtube.com/watch?v=oTNFgu6mlfQ
EU-Project CARBCOMN
HORIZON-EIC-101161535 Read more
This project has received funding from the European Union’s Horizon Europe research and innovation programme under grant agreement No 101161535. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or REA. Neither the European Union nor the granting authority can be held responsible for them.
Newsletter
Register for our e-mail list, we will keep you posted!